Weishaupt MCT Z20 140E 12-W Flame Detector
Technical specs, application notes, replacement checks, and related model references.
Product Overview
The Weishaupt MCT Z20 140E 12-W is a premium, high-voltage electronic ignition transformer engineered for reliable and instantaneous fuel ignition in Weishaupt gas and oil burners. Featuring a fully encapsulated, epoxy-resin potted design, it delivers a powerful and stable ignition spark even under harsh combustion chamber conditions (such as high turbulence or cold starts). Its high electromagnetic compatibility (EMC) ensures it operates without interfering with the burner's digital combustion manager or flame sensors.
Technical Specifications
Component Type
Electronic Ignition Transformer
Output Voltage
High-frequency ignition spark (Model specific)
Duty Cycle
Intermittent (Standard ignition cycle)
Encapsulation
Epoxy-resin potted (Moisture & dust resistant)
EMC Compliance
High electromagnetic immunity
Selection Notes & Data Verification
The MCT Z20 140E 12-W page is structured for engineering comparison: confirm the product type, firing range, fuel type, operating mode, electrical supply, and safety approvals against the manufacturer datasheet before specifying the burner or component.
Burner.wiki normalizes product data for discovery and comparison, but final selection should account for combustion chamber backpressure, local emission limits, control sequence requirements, and site commissioning conditions.
Typical Applications
Related Models
Related Knowledge
FAQ
What is Weishaupt MCT Z20 140E 12-W used for?
Weishaupt MCT Z20 140E 12-W is referenced as a flame detector for industrial combustion systems. Verify the exact application against the burner documentation, control cabinet wiring, and manufacturer datasheet.
Can MCT Z20 140E 12-W replace another model?
Replacement depends on voltage, safety timing, wiring terminals, flame supervision method, mechanical fit, and local combustion safety requirements.
What should be checked before installing MCT Z20 140E 12-W?
Check supply voltage, burner sequence, fuel type, pressure or capacity range, detector compatibility, safety loop configuration, and the equipment nameplate before commissioning.
Documentation Note
Technical documentation should be verified against the manufacturer datasheet, burner cabinet wiring diagram, and equipment nameplate before installation or replacement.
- Check supply voltage and frequency.
- Confirm terminal layout and safety interlocks.
- Verify flame detector or actuator compatibility.
Need Engineering Help?
Our experts can help you verify if MCT Z20 140E 12-W fits your combustion chamber and backpressure requirements.
Contact Engineering