Siemens 150242-70 Flame Detector
Technical specs, application notes, replacement checks, and related model references.
Product Overview
The Siemens 150242-70 is a reliable pressure monitoring device designed to ensure the safe operation of burner systems by verifying adequate gas and air pressures. It acts as a critical safety interlock, continuously sensing the system pressure and signaling the burner controller to initiate a lockout if hazardous conditions are detected. Widely applied in commercial and industrial boilers, the 150242-70 protects the system from operating under lean or rich fuel mixtures caused by pressure anomalies. Siemens pressure switches are known for their precision, durability, and essential role in complying with stringent combustion safety regulations.
Key Features
- Component Type: Pressure Switches
- Operating Voltage: AC 220V / 230V (Standard)
- Protection Class: IP54
- Original Siemens quality and reliability
- Compliant with relevant CE / DIN EN standards
Technical Specifications
Verification RequiredVerification Status
Core model identity has been collected. Electrical parameters, terminal layout, replacement compatibility, and safety timing should be verified against official manufacturer documentation before field use.
Selection Notes & Data Verification
The 150242-70 page is structured for engineering comparison: confirm the product type, firing range, fuel type, operating mode, electrical supply, and safety approvals against the manufacturer datasheet before specifying the burner or component.
Burner.wiki normalizes product data for discovery and comparison, but final selection should account for combustion chamber backpressure, local emission limits, control sequence requirements, and site commissioning conditions.
Typical Applications
Related Models
Related Knowledge
FAQ
What is Siemens 150242-70 used for?
Siemens 150242-70 is referenced as a flame detector for industrial combustion systems. Verify the exact application against the burner documentation, control cabinet wiring, and manufacturer datasheet.
Can 150242-70 replace another model?
Replacement depends on voltage, safety timing, wiring terminals, flame supervision method, mechanical fit, and local combustion safety requirements.
What should be checked before installing 150242-70?
Check supply voltage, burner sequence, fuel type, pressure or capacity range, detector compatibility, safety loop configuration, and the equipment nameplate before commissioning.
Documentation Note
Technical documentation should be verified against the manufacturer datasheet, burner cabinet wiring diagram, and equipment nameplate before installation or replacement.
- Check supply voltage and frequency.
- Confirm terminal layout and safety interlocks.
- Verify flame detector or actuator compatibility.
Need Engineering Help?
Our experts can help you verify if 150242-70 fits your combustion chamber and backpressure requirements.
Contact Engineering