Brahma EG12*SR*GMO Gas Valve
Technical specs, application notes, replacement checks, and related model references.
Product Overview
The Brahma EG12*SR*GMO is an authoritative Class A safety solenoid valve specifically developed for the fast and secure shut-off of fuel gases in commercial and industrial burners. Operating as a normally closed (NC) valve, it instantly seals the gas train upon power loss, preventing hazardous gas leakage. Constructed with a rugged brass or aluminum body, it fully complies with EN 161 safety standards and handles a wide range of operating pressures.
Technical Specifications
Valve Class
Class A (EN 161)
Operation
Normally Closed (NC) / Fast Opening
Application
Natural Gas, LPG, Town Gas
Body Material
Brass or Die-cast Aluminum
Approvals
CE, DVGW
Selection Notes & Data Verification
The EG12*SR*GMO page is structured for engineering comparison: confirm the product type, firing range, fuel type, operating mode, electrical supply, and safety approvals against the manufacturer datasheet before specifying the burner or component.
Burner.wiki normalizes product data for discovery and comparison, but final selection should account for combustion chamber backpressure, local emission limits, control sequence requirements, and site commissioning conditions.
Typical Applications
Related Models
Related Knowledge
FAQ
What is Brahma EG12*SR*GMO used for?
Brahma EG12*SR*GMO is referenced as a gas valve for industrial combustion systems. Verify the exact application against the burner documentation, control cabinet wiring, and manufacturer datasheet.
Can EG12*SR*GMO replace another model?
Replacement depends on voltage, safety timing, wiring terminals, flame supervision method, mechanical fit, and local combustion safety requirements.
What should be checked before installing EG12*SR*GMO?
Check supply voltage, burner sequence, fuel type, pressure or capacity range, detector compatibility, safety loop configuration, and the equipment nameplate before commissioning.
Documentation Note
Technical documentation should be verified against the manufacturer datasheet, burner cabinet wiring diagram, and equipment nameplate before installation or replacement.
- Check supply voltage and frequency.
- Confirm terminal layout and safety interlocks.
- Verify flame detector or actuator compatibility.
Need Engineering Help?
Our experts can help you verify if EG12*SR*GMO fits your combustion chamber and backpressure requirements.
Contact Engineering